Jeep Cherokee XJ Steering Upgrade 1-ton

Product Description

XJ Cherokee 1 Ton Steering Upgrade.

Looking to upgrade your stock Jeep XJ Cherokee steering linkage? Is your lifted Jeep having alignment problems? With our Jeep 1 ton steering upgrade, you eliminate the hard to adjust "Y" stock steering, it allows for a longer drag link to help with your steering angles, and most importantly gives you heavy duty steering that will take a beating and hold up to the off-road abuse.

The rods are a beefy 1.25" diameter DOM, with an almost .25" wall; threads are direct tapped into the tube. This means (unlike a threaded insert) the TRE has full thread engagement into the tube for the length of its threads. On this system the passenger side TRE dust boot is replaced with a polyurethane spacer, which pulls the body of the TRE against this knuckle. This eliminates the tie rod roll that an inverted T setup sometimes has.

While we have had great luck not running a steering stabilizer, if you really have to have one feel free to order this bracket kit from summit racing. This kit will still allow you to easily align our steering setup.

We recommend having this kit installed by a professional 4x4 shop in your area as drilling and reaming needs to be done to knuckles and pitman arm to fit the 1 ton tie rod ends. Installation should take about 2 hours.

Please read the installation instrucions below BEFORE BUYING THIS PRODUCT. This will ensure that you realize what is involved with this install, and the limitations of this setup. Any aftermarket diff guards/covers may need to be modified or replaced depending on their standoff compared to the stock cover. Most half guards (Like the Warn Diff cover) can easily be modified to fit.

Resources for drill bits/reamers...
Mcmaster-Carr drill 5/8" bit #2933A28 (direct link)
Speedway Motors - 1 1/2 Inch Per Foot Reamer(direct link)